Allowing products after applying UV dispensing to be stored temporarily in the machine according by pre-set procedure , to enable solidifying, increasing product quality.      ．Automated In Line Machine.   ．Temporary storage function after UV Dispensing,    allowing silicon to solidify naturally.   ．Temporary storage function after UV Dispensing,    allowing silicon to solidify naturally. ．Machine design may change according to product    size requested by customers.

装置寸法	2330(L)×1180(W)×1960(H)mm
装置重量	About  1000 kg
操作方式	System of PLC control.  Touch Panel fitted with 5.7” monochromatic screen.
電源	三ψ AC220V 50/60Hz
気体圧力	Air 5~ 7 kg /c㎡
Requirement of  vacuum	-75kpa以上
クリーン グレード	Class 1000
Cycle time	8sec/2pcs
Products  composing	LCD+FPC
Panel size	1.3~3.5 inch
The before and after of moving mechanism	XYZ  moving
Tray  moving  mechanism	Driving by X axle servor motor.
Tray moving way	Clamping Jaw Gripping
Tray buffer mechanism	Z axle 2 level elevation, may carry and release Tray at the same time.
Recovery mechanism of vacant tray	Loading by roller
Mechanism of postposition stage	Joining with down stream machine to enable 1 or 2 piece transport.